What is and How to Find IMEI Number:
*#06# Cells Identity Code (IMEI = International Mobile Equipment Identity)
XXXXXX XX XXXXXX X
TAC FAC SNR SP
TAC = Type Approval Code (first 2 digits = country code of the approvalcountry)
FAC = Final Assembly Code: (01,02 = AEG)
(10,20 Nokia)
(40,41,44 Siemens)
(30 Ericsson)
(50 Bosch)
(51 Sony,Siemens,Ericsson)
(60 Alcatel)
(65 AEG)
(70 Sagem)
(75 Dancall)
(80 Philips)
(85 Panasonic)
SNR = Serial Nr.
SP = Spare (always "0")
The James Bond Trick To Listen Others Conversation On Mobile Phone
If you short-circuit the left middle and right pins on the bottom of the phone with all
connections touching each other, the Nokia software hangs! The profile "Headset"
will be activated. Before you do this just activate the "Automatic Answer" in the
headset profile and set the ringing volume to "Mute". Now you can use your phone
for checking out what people are talking about in a room. Just place it under a table
in a room and call it. The phone receives the call without ringing and you can listen
to what people are saying!
How To Network Monitor From Mobile
There is a hidden menu inside your Nokia phone. If you want to activate it, you'll
have to re-program some chips inside of your phone.
Check your software version. You can only continue if you have v4.33, v4.73 or v5.24.
Take apart the phone.
De-solder the EEPROM (ATMEL AT 24C64)
Read out the data with an EEPROM programmer and save it to a file (Backup)
If you have v.33 or v4.73, change the address "03B8" from "00" to "FF"
If you have v5.24 then change the address "0378" from "00" to "FF"
Write the new data to the EEPROM and solder it back to the phone
Power on your phone and you should have "Netmonitor" enabled.
The Network Monitor gives you the following information:
Carrier number, MS RX Level in DBM, Received signal quality, MS TX power
level, C1 (Path loss criterion, used for cell selection and reselection). The range is -99
to 99, RTL (Radio link timeout), Timeslot, Indication of the transmitter status,
Information on the Network parameters, TMSI (Temporary Mobile Subscriber
Identity), Cell identification (Cell ID, Number of cells being used), MCC (Mobile
country code), MCN (Mobile network code), LAC (Location area code), Ciphering
(On/Off), Hopping (On/Off), DTX (On/Off), Discard cell barred information.
How To Stop Sim Clock For Saving Battery
*#746025625#
[*#sim0clock#]
Checks if the sim clock can be stopped. Sim clock stop is a kind of stand-by
mode which will save battery time. This code doesn't work with software
version 4.59.
It will tell you if it can be stopped or not.
How To Check Warranty Menu On Nokia
*#92702689# takes you to a secret menu with 6 choices:
[*#war0anty#]
1. Displays Serial Number.
2. Displays the Month and Year of Manufacture (0997).
3. Displays (if there) the date where the phone was purchased (MMYY).
4. Displays the date of the last repairment - if found (0000).
5. Makes you capable of transferring user data if you have the gear for it.
6. Shows how long the phone has been used to talk. This counter is not
reset by when you "clear timers" like the counters in the call register.
*** WARNING: Using secret codes may be harmful to your phone and
result in disabling or worse. Use these codes at your own discretion, we
accept no responsiblility for blocked pones while using these codes!!!
Share
No comments:
Post a Comment